Caple C603E Manual de usuario descargar pdf (Pagina 5)

Installing The Appliance

IMPORTANT: The benchtop and surrounding cabinet(s) must be able to withstand a minimum

temperature rise of 100°C above the ambient temperature of the room it is located in, during period of

use.

This appliance is to be built into a kitchen unit (depending on size) or 600mm worktop, providing the following

minimum distances are allowed:

z 600mm (minimum) between the hob surface and the underside of any horizontal surface above it.

z 50mm clearance around the appliance and between the appliance surface and any combustible materials.

CAUTION: The surface temperature of the top and bottom of the appliance exceeds 95°C. To avoid a

hazard, access to the bottom of the appliance from underneath the benchtop must be restricted

IMPORTANT: There must be a gap of at least 35mm between the bottom of the appliance in situ and

any surface directly below it.

Cut a hole in the benchtop that corresponds with the dimension shown on above drawings and carefully turn

the cooktop upside down and place it on a cushioned mat and apply the sealing strip provided around the edge

of the appliance. The protective covering must be removed from both sides. Do not leave a gap in the

sealing agent or overlap the thickness.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Caple C603E Manual de usuario Pagina 5