Caple CR9215 Información técnica descargar pdf (Pagina 20)

5. SETTING/ADJUSTING DOOR LATCH PINS

5.1 Set the door latches once the Traditional is assembled:

Setting:

• Loosenlockingflangenutandremovedoorlatchpin,nut

and black washer

• Apply‘Loctite’todoorpinandre-assembledoorlatchpin,

washer and flange nut, but do not tighten flange nut

• Fitdoor

• Adjustdoorlatchpin,untilthedoorsealseatssecurelyand

evenly around the front plate. The door latch pin can only

be adjusted with the door in open position. Close the door

and check the seal

• Tightentheflangenuttoensurethatthedoorlatchpinis

locked in position

Door Adjustment

• Openeverydoor

• Loosenlockingflangenutforeachdoor

• Adjusteachdoor’slatchpinuntilthedoorsealseats

securely and evenly around the front plate. The door latch

pin can only be adjusted with the door in the open

position. Close the door to check the seal.

• Tightentheflangenuttoensurethatthedoorlatchpinis

locked in position

INSTALLATION INSTRUCTIONS

INSTALLATION

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Caple CR9215 Información técnica Pagina 20