Caple RBR5 Especificaciones

introduction Spécification du produit installation fonctionnement Dépannage Référence Contact IntroductionDESCRIPTION SOMMAIRE D

Fonctionnement globalFonctionnement global:Fonctionnement globalAvertisseur sonore : Lorsqu'une alarme est activée, l'avertisseur sonore se

Typical Performance Characteristics (Continued)ApplicationsThe LM35 can be applied easily in the same way as otherintegrated-circuit temperature senso

Typical ApplicationsCAPACITIVE LOADSLike most micropower circuits, the LM35 has a limited abilityto drive heavy capacitive loads. The LM35 by itself i

Typical Applications (Continued)DS005516-10FIGURE 10. Fahrenheit ThermometerDS005516-11FIGURE 11. Centigrade Thermometer (Analog Meter)DS005516-12FIGU

Typical Applications (Continued)DS005516-16*=1% or 2% film resistorTrim RBfor VB=3.075VTrim RCfor VC=1.955VTrim RAfor VA=0.075V + 100mV/˚C x TambientE

Block DiagramDS005516-23LM35www.national.com 10

Physical Dimensions inches (millimeters) unless otherwise notedTO-46 Metal Can Package (H)Order Number LM35H, LM35AH, LM35CH,LM35CAH, or LM35DHNS Pack

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)Power Package TO-220 (T)Order Number LM35DTNS Package Number TA03FTO-92 Pla

NotesLIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WR

HTransmitters and receivers aredirectly compatible with popular“industry-standard” connectors:ST, SMA, SC and FC. They arecompletely specified withmul

2HFBR-0400 Series Part Number GuideHFBR X4XXaa1 = Transmitter Option T (Threaded Port Option)2 = Receiver Option C (Conductive Port Receiver Optio

http://www.angelfire.com/electronic/azmuth1/capteurvisio.jpghttp://www.angelfire.com/electronic/azmuth1/capteurvisio.jpg [2001-03-28 22:44:28]

3HFBR-0400 SeriesEvaluation KitsHFBR-0410 ST Evaluation KitContains the following :• One HFBR-1412 transmitter• One HFBR-2412 five megabaudTTL receive

4Mechanical DimensionsHFBR-0400 SMA SeriesHFBR-X43XHFBR-X45XHFBR-X40X13.2(052)2.5(0.10)DIANOTE 2NOTE: ALL DIMENSIONS IN MILLIMETRES AND (INCHES).13.

5Mechanical DimensionsHFBR-0400 ST SeriesHFBR-X44XHFBR-X46XHFBR-X41X13.2(0.52)2.5 (0.10) DIA PIN CIRCLE8.6(0.34)PIN DIANOTE 2DIANOTE: ALL DIMENSIONS

6Mechanical DimensionsHFBR-0400T ThreadedST SeriesHFBR-X44XTHFBR-X46XTHFBR-X41XT81352467DIA.2.54(0.10)3.81(0.15)7.1(0.28)DIA12.7(0.50)12.7(0.50)27.2(1

7Mechanical DimensionsHFBR-0400FC SeriesMechanical DimensionsHFBR-0400 SC Series3.81(0.15)12.7(0.50)12.7(0.50)5.1(0.20)81352467PIN NO. 1INDICATOR7.9(0

8Figure 1. HFBR-0400 ST Series Cross-Sectional View.Panel Mount HardwarePort Cap HardwareHFBR-4402: 500 SMA Port CapsHFBR-4120: 500 ST Port Plugs (120

9OptionsIn addition to the various portstyles available for the HFBR-0400 series products, there arealso several extra options thatcan be ordered. To

10Typical Link DataHFBR-0400 SeriesDescriptionThe following technical data istaken from 4 popular links usingthe HFBR-0400 series: the 5 MBdlink, Ethe

115 MBd Logic Link DesignIf resistor R1 in Figure 2 is70.4 Ω, a forward current IF of48 mA is applied to the HFBR-14X4 LED transmitter. With IF =48 mA

12Figure 6. Propagation Delay throughSystem with One Meter of Cable.Figure 8. System Propagation Delay Test Circuit and Waveform Timing Definitions.Fi

Fonctionnement (suite)Fonctionnement des programmes Micro- contrôleur et visual basic.Le LMKG alarme série 2001 possède un interface facile d'uti

13Ethernet 20 MBd Link (HFBR-14X4/24X6)(refer to Application Note 1038 for details)Typical Link PerformanceParameter Symbol Typ.[1,2]Units Condition

14155 MBd Link (HFBR-14X4/24X6)(refer to Application Bulletin 78 for details)Typical Link Performance Parameter Symbol Typ.[1,2]Units Max. Units Cond

15HFBR-14X2/14X4 Low-Cost High-SpeedTransmittersDescriptionThe HFBR-14XX fiber optictransmitter contains an 820 nmAlGaAs emitter capable ofefficiently

16HFBR-14X2 Output Power Measured Out of 1 Meter of CableParameter Symbol Min. Typ.[2]Max. Unit Conditions Reference50/125 µmPT50-21.8 -18.8 -16.8

17HFBR-14X4 Output Power Measured Out of 1 Meter of CableParameter Symbol Min. Typ.[2]Max. Unit Conditions Reference50/125 µm PT50 -18.8 -15.8 -13.

18Recommended DriveCircuitsThe circuit used to supply currentto the LED transmitter cansignificantly influence the opticalswitching characteristics of

19Figure 9. Forward Voltage andCurrent Characteristics.Figure 12. Test Circuit for Measuring tr, tf.Figure 11. Recommended Drive Circuit.Figure 10.

20HFBR-24X2 Low-Cost5MBd ReceiverDescriptionThe HFBR-24X2 fiber opticreceiver is designed to operatewith the Hewlett-Packard HFBR-14XX fiber optic tra

21Dynamic Characteristics-40°C to +85°C unless otherwise specified; 4.75 V ≤VCC ≤5.25 V; BER ≤10-9Parameter Symbol Min. Typ.[3]Max. Units Conditions

22HFBR-24X6 Low-Cost125 MHz ReceiverDescriptionThe HFBR-24X6 fiber opticreceiver is designed to operatewith the Hewlett-Packard HFBR-14XX fiber optic

Fonctionnement(suite)http://www.angelfire.com/electronic/azmuth1/foncvb.html (2 of 2) [2001-03-28 22:44:35]

23Electrical/Optical Characteristics -40°C to +85°C; 4.75 V ≤Supply Voltage ≤5.25 V,RLOAD = 511 Ω, Fiber sizes with core diameter ≤100 µm, and N.A. ≤-

24Dynamic Characteristics -40°C to +85°C; 4.75 V ≤Supply Voltage ≤5.25 V; RLOAD = 511 Ω, CLOAD= 5 pF unless otherwise specifiedParameter Symbol Min. T

25Figure 14. Typical Pulse WidthDensity vs. Frequency.Figure 16. Receiver SpectralResponse Normalized to 820 nm.Figure 15. Typical Rise and FallTimes

HFor technical assistance or the location ofyour nearest Hewlett-Packard sales office,distributor or representative call:Americas/Canada: 1-800-235-0

DDIISSPPOOSSIITTIIOONN DDEE LLAA PPLLAAQQUUEE BBUUSS IISSAALLIISSTTEE DDEESS PPIIÈÈCCEESSItem Nb Valeur Attribue ID1 4 CONN ISA 72 pins CON1,CO

DDIISSPPOOSSIITTIIOONN DDEE LLAA PPLLAAQQUUEE DDEE CCOOMMMMUUNNIICCAATTIIOONN UUAARRTTLLIISSTTEE DDEESS PPIIÈÈCCEESSItem Nb Valeur Attribue ID

DDIISSPPOOSSIITTIIOONN DDEE LLAA PPLLAAQQUUEE MMIICCRROOCCOONNTTRRÔÔLLEEUURRLLIISSTTEE DDEESS PPIIÈÈCCEESSItem Nb Valeur Attribue ID1 1 25pF POL

CAHIER TECHNIQUEPROFESSEUR : ERIC VANDAL SCHÉMA DE LA PLAQUE BUS ISA PAGE 1 SUR 2SSCCHHÉÉMMAA DDEE LLAA PPLLAAQQUUEE BBUUSS IISSAA

CAHIER TECHNIQUEPROFESSEUR : ERIC VANDAL SCHÉMA DE LA PLAQUE DE COMMUNICATIONUARTPAGE 1 SUR 2SSCCHHÉÉMMAA DDEE LLAA PPLLAAQQUUEE DDEE CCOOMMMMUUN

ContactProjet réalisé par :Natasha MailléMartin GagnonKevin KennedyMichaël LemieuxÉtudiants en Génie électrique, Option télécommunication 3e année, fi

http://www.angelfire.com/electronic/azmuth1/dgtranmic.jpghttp://www.angelfire.com/electronic/azmuth1/dgtranmic.jpg (1 of 3) [2001-03-28 22:44:59]

Élaborer un plan général du système et en décrire son fonctionnement global.Faire de la recherche afin de trouver la documentation nécessaire à l&apos

http://www.angelfire.com/electronic/azmuth1/dgtranmic.jpghttp://www.angelfire.com/electronic/azmuth1/dgtranmic.jpg (2 of 3) [2001-03-28 22:44:59]

http://www.angelfire.com/electronic/azmuth1/dgtranmic.jpghttp://www.angelfire.com/electronic/azmuth1/dgtranmic.jpg (3 of 3) [2001-03-28 22:44:59]

http://www.angelfire.com/electronic/azmuth1/dgrecmic.jpghttp://www.angelfire.com/electronic/azmuth1/dgrecmic.jpg (1 of 2) [2001-03-28 22:45:12]

http://www.angelfire.com/electronic/azmuth1/dgrecmic.jpghttp://www.angelfire.com/electronic/azmuth1/dgrecmic.jpg (2 of 2) [2001-03-28 22:45:12]

Programme du micro-contrôleur**************************************************** Projet : SYSTEME D'ALARME ** Titre : Programmme Test pour TEMPE

IntroductionDESCRIPTION SOMMAIRE DU PRODUIT :Le " LMKG série 2001 " est un système d'alarme programmable à dispositifs de sécurité mult

; la Tx du UART ( PA0 ); CTRL sur PB1;CRL EQU ; Bascule pour charger les; param de Tx et Rx du UART; CTRL sur PA1DDR EQU 1 ;TRE EQU 2 ;RRD EQU 0Vecteu

BSET RRD,PORTA ; MET LE UART EN TX ET MET; EN HAUTE IMPEDANCE LE; RBR1-8DEPART BCLR 0,PORTCBSET 1,PORTCBCLR 2,PORTCLDA PORTAAND #%01100000LSRALSRALSRA

SRLIREVALEUR LDA #$00 ; choisi canal 0; et active ConvSTA ACRLOOPAN0 BRCLR 7,ACR,LOOPAN0LDA ARRSTA VALEUR ; sauve valeurRTS***************************

**************************************************** Sous Routine: DELAI ENTRE LES LECTURES ****************************************************SRDELA

BCLR 0,PORTCBSET 1,PORTCCLR XTempCLR ATEMPCLR TEMP1CLR VALEURCLR CAPTEURCLR ALARMERTS****************************************************** Definition

http://www.angelfire.com/electronic/azmuth1/ogvb.jpghttp://www.angelfire.com/electronic/azmuth1/ogvb.jpg (1 of 2) [2001-03-28 22:45:28]

http://www.angelfire.com/electronic/azmuth1/ogvb.jpghttp://www.angelfire.com/electronic/azmuth1/ogvb.jpg (2 of 2) [2001-03-28 22:45:28]

http://www.angelfire.com/electronic/azmuth1/ogrecvb.jpghttp://www.angelfire.com/electronic/azmuth1/ogrecvb.jpg (1 of 3) [2001-03-28 22:45:41]

http://www.angelfire.com/electronic/azmuth1/ogrecvb.jpghttp://www.angelfire.com/electronic/azmuth1/ogrecvb.jpg (2 of 3) [2001-03-28 22:45:41]

http://www.angelfire.com/electronic/azmuth1/ogrecvb.jpghttp://www.angelfire.com/electronic/azmuth1/ogrecvb.jpg (3 of 3) [2001-03-28 22:45:41]

SpécificationsSPÉCIFICATIONS DU PRODUITLe système est subdiviser en trois parties distinctes :● Un système de traitement de l'information.● U

Procédures de testsprocédures de testsProcédure de test : Test du capteur magnétique1- Alimenter le capteur avec une tension de 5 volts.2- Installer l

http://www.angelfire.com/electronic/azmuth1/capteurmagnet.jpghttp://www.angelfire.com/electronic/azmuth1/capteurmagnet.jpg [2001-03-28 22:45:53]

Procédure de tests (suite)suite...procédures de testProcédure de test : Test de l'avertisseur sonore1- Alimenter le capteur à 5 volts.Résultats d

Procédures de tests (suite)Procédure de test (suite) : Test du capteur de température1- Alimenter le capteur tel qu'indiqué dans les fiches techn

Procédures de tests (suite)suite...procédures de testProcédure de test : Test du détecteur de passage1- Alimenter le détecteur à 5V.2- Vérifier la dif

Procédures de tests (suite)suite...procédures de testProcédure de test : Test de l'amplificateur du capteur de température1- Alimenter le circuit

http://www.angelfire.com/electronic/azmuth1/amplitemp.jpghttp://www.angelfire.com/electronic/azmuth1/amplitemp.jpg [2001-03-28 22:46:31]

Procédures de tests (suite)suite...procédures de testProcédures de test :Les lignes qui suivent explique les caractéristiques des broches utilisées po

http://www.angelfire.com/electronic/azmuth1/68705.jpghttp://www.angelfire.com/electronic/azmuth1/68705.jpg (1 of 2) [2001-03-28 22:47:06]

http://www.angelfire.com/electronic/azmuth1/68705.jpghttp://www.angelfire.com/electronic/azmuth1/68705.jpg (2 of 2) [2001-03-28 22:47:06]

SpécificationsSpécifications de la carte I/OCarte I/O entréedeux états: capteur de température, capteur de mouvent, capteur infra-rouge, module fibre

Procédures de tests suitesuite...procédures de testProcédures de test du UART HD-6402 :Vérifier la tension d'entrée sur la broche Vcc (pin.1) du

http://www.angelfire.com/electronic/azmuth1/Uart.jpghttp://www.angelfire.com/electronic/azmuth1/Uart.jpg (1 of 2) [2001-03-28 22:47:33]

http://www.angelfire.com/electronic/azmuth1/Uart.jpghttp://www.angelfire.com/electronic/azmuth1/Uart.jpg (2 of 2) [2001-03-28 22:47:33]

InstallationMATÉRIEL REQUIS:● 1 kit LMKG série 2001● Ordinateur● 1 tournevis étoile moyenLISTE DES PIÈCES POUR UN KIT DE LMKG SÉRIE 2001● 1 Bo

Mini-caméra1. Avant d'installer la carte Win TV mettre le PC hors tension.2. Toucher le châssis du PC avec la main pour décharger de toute électr

RéférenceVoici une liste de référence de divers composantes du projet.le max-232le UARTLes ampli de la cartes I/OCapteur de températureModule de trans

General DescriptionThe MAX220–MAX249 family of line drivers/receivers isintended for all EIA/TIA-232E and V.28/V.24 communica-tions interfaces, partic

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers2 ______________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers_______________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers4 ______________________________________________________________________________________

InstallationMATÉRIEL REQUIS:● 1 kit LMKG série 2001● Ordinateur● 1 tournevis étoile moyenLISTE DES PIÈCES POUR UN KIT DE LMKG SÉRIE 2001● 1 Bo

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers_______________________________________________________________________________________

mAMAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers6 ____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers_______________________________________________________________________________________

Input Logic Threshold LowMAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers8 _____________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers_______________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers10 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 1

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers12 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 1

MAX220–MAX249_______________Detailed DescriptionThe MAX220–MAX249 contain four sections: dualcharge-pump DC-DC voltage converters, RS-232 dri-vers, RS

Mini-caméra1. Avant d'installer la carte Win TV mettre le PC hors tension.2. Toucher le châssis du PC avec la main pour décharger de toute électr

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 1

MAX220–MAX249Tables 1a–1d define the control states. The MAX244has no control pins and is not included in these tables. The MAX246 has ten receivers a

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 1

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers18 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 1

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers20 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 2

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers22 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 2

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers24 _____________________________________________________________________________________

Installation(suite)CARTE BUS ISAÀ partir de cette carte vous pouvez insérez les cartes à connection ISA Chaque emplacement est bien identifier.Carte I

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 2

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers26 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 2

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers28 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 2

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers30 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 3

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers32 _____________________________________________________________________________________

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 3

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers34 _____________________________________________________________________________________

Carte UARTVous insérez la carte du UARTInstallation(suite)http://www.angelfire.com/electronic/azmuth1/installation2.html (2 of 2) [2001-03-28 22:43:59

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers______________________________________________________________________________________ 3

MAX220–MAX249+5V-Powered, Multichannel RS-232Drivers/Receivers___________________________________________Ordering Information (continued)* Contact fac

5-1March 1997HD-6402CMOS Universal AsynchronousReceiver Transmitter (UART)Features• 8.0MHz Operating Frequency (HD-6402B)• 2.0MHz Operating Frequency

5-2Functional DiagramControl DefinitionCONTROL WORD CHARACTER FORMATCLS 2 CLS 1 PI EPE SBS START BIT DATA BITS PARITY BIT STOP BITS0 0 0 0 0 1 5 ODD 10

5-3Pin DescriptionPIN TYPE SYMBOL DESCRIPTION1VCC† Positive Voltage Supply2 NC No Connection3 GND Ground4 I RRD A high level on RECEIVER REGISTER DISA

5-4Transmitter OperationThe transmitter section accepts parallel data, formats the dataand transmits the data in serial form on the Transmitter Regis-

5-5Start Bit DetectionThe receiver uses a 16X clock timing. The start bit could haveoccurred as much as one clock cycle before it was detected,as indi

5-6Absolute Maximum Ratings Thermal InformationSupply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+8.0VInput, Out

5-7All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.Intersil products are sold by

DeviceOperatingTemperature RangePackageSEMICONDUCTORTECHNICAL DATADIFFERENTIAL INPUTOPERATIONAL AMPLIFIER(QUAD MC1741)ORDERING INFORMATIONMC4741CDMC47

InstallationFibre optiquePour alimenter le module de la fibre optique TX/RX, on prend l'alimentation sur le bornier de la carte I/O(5V, mise à la

MC4741C2MOTOROLA ANALOG IC DEVICE DATAMAXIMUM RATINGS (TA = +25°C, unless otherwise noted.)Rating Symbol Value UnitPower Supply Voltage VCCVEE+18–18Vd

MC4741C3MOTOROLA ANALOG IC DEVICE DATAELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.)CharacteristicSymbol M

MC4741C4MOTOROLA ANALOG IC DEVICE DATAVO, OUTPUT VOLTAGE (V )ppVO, OUTPUT VOLTAGE (V )ppVO, OUTPUT VOLTAGE (V )pp±15 V Supplies ±12 V ±9.0 V ±6.0 V±15

MC4741C5MOTOROLA ANALOG IC DEVICE DATA1/4MC4741C1/4MC4741CFigure 7. Bi–Quad FilterFigure 8. Open Loop Voltage Gainversus Supply VoltageFigure 9. Trans

MC4741C6MOTOROLA ANALOG IC DEVICE DATAP SUFFIXPLASTIC PACKAGECASE 646–06ISSUE LD SUFFIXPLASTIC PACKAGECASE 751A–03ISSUE F(SO–14)OUTLINE DIMENSIONSNOTE

LM35Precision Centigrade Temperature SensorsGeneral DescriptionThe LM35 series are precision integrated-circuit temperaturesensors, whose output volta

Connection DiagramsTO-46Metal Can Package*DS005516-1*Case is connected to negative pin (GND)Order Number LM35H, LM35AH, LM35CH, LM35CAH orLM35DHSee NS

Absolute Maximum Ratings (Note 10)If Military/Aerospace specified devices are required,please contact the National Semiconductor Sales Office/Distribu

Electrical Characteristics(Notes 1, 6)LM35 LM35C, LM35DParameter Conditions Tested Design Tested Design UnitsTypical Limit Limit Typical Limit Limit (

Typical Performance CharacteristicsThermal ResistanceJunction to AirDS005516-25Thermal Time ConstantDS005516-26Thermal Responsein Still AirDS005516-27