Caple C602E Manual de instalación descargar pdf (Pagina 33)

Revision 1.9 - 33 -

3/8" or less

Easy Move slide sensor

Proximity switch plate

15 Lift arm sensor

6.10

Easy Move Sensor Adjustment and setup

The PALFINGER Liftgates ILFP Easy Move is a self-adjusting sliding option. The Easy Move requires

- (1) B-15 Sensor, mounted to the inside of the main lift arm

- (1) Proximity switch, installed at the sliding mount plate

- (1) Proximity switch plate, attached to the sliding rail

When successfully installed the ILFP, the Easy Move option has to be activated. In order to do that,

proceed with the following steps:

1) Slide the gate into its stored position and raise it up, make sure the proximity switch is being

overlapped by the metal sensor plate on the slide rail – distance approx. 3/8” or less.

2) Connect the J-41 Plug to the board to activate the B-15 Sensor

Proximity switch

Adjustable proximity

switch plate

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

Caple C602E Manual de instalación Pagina 33