Caple CAFF21 Manual de usuario descargar pdf (Pagina 11)

INSTALL THE MOTOR CHAIN COVER

STEP 1: Install the motor chain cover using

three M4 x 6mm button head screws. Before

tightening the screws adjust the cover position

so that the gap between the cover and the

chain ring guard is the same at the top and the

bottom.

This completes the mechanical installation of

the drive unit. What remains is to install the

motor controller, the handlebar mounted

throttle, the optional e-bike computer/display,

and the battery. You may want to congratulate

yourself, have a beer or an iced tea, and get

ready to do that last few steps before you ride.

MOUNT THE CONTROLLER

The controller contains the sophisticated elec-

tronics and software at the heart of your EMD

system. It is relatively small and light and can

be mounted anywhere that it can get air flow

for cooling.

The unit comes with a bracket that allows the

controller to be mounted to a standard water

bottle mount as shown on Photo 18.

EcoSpeed also makes a different bracket that

can be used to mount the controller to one of

our battery cradles or to any flat surface. Con-

tact EcoSpeed if you would like one of those

instead.

STEP 1: Attach the included bracket to a free

water bottle mount.

STEP 2: Look at the back of your controller

and you will see 5 screws. Orient the controller

so that the text is upright and remove the two

screws on the bottom and the single center

screw.

STEP 3: Rest the controller on the bracket

and attach it with the three screws removed in step 2. Photo 19.

(17) Motor Chain Cover Installed

(18) Bracket for Attaching Controller to

a Water Bottle Mount

(19) Mounting Controller on Bracket

1 2 ... 6 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios