
HPOD C-, X-, Ku-Band High-Power Outdoor Amplifier MN/HPOD.IOM
Serial-Based Remote Product Management Revision 8
5–17
Parameter
Type
(Instruction
Number of
Arguments
Description of Arguments
Response to
Command
(Instruction
Response to Query
Maintenance
Status
alpha- numeric
Returns the maintenance status of the unit.
Example:
<1/RMS?’cr’
>0001/RMS=’cr’
P24VT=024.1’cr’
P15VT=015.2’cr’
P10V1=010.4’cr’
P10V2=010.4’cr’
P7V5T=007.8’cr’
P5VLT=005.8’cr’
N5VLT=-05.7’cr’
FANR1=100.0’cr’
FANR2=100.0’cr’
ATEMP=+40.0’cr’
A10V1=010.2’cr’
A10V2=010.2’cr’
FWPWR=+37.6’cr’
RVPWR=02.0’cr’’If’ (optional)
*Note: REFV will appear if REF OSC module is installed.
(See Description of
Arguments)
numeric,
000000000 to
999999999
Returns the unit’s 9 digit serial number in the form xxxxxxxxx.
Example:
<1/RSN?’cr’
>0001/RSN=072282040’cr’’lf’
(See Description of
Arguments)
Status
alpha- numeric
Returns the utility status of the unit.
Example:
RUS=’cr’
ADR=0001’cr’
BDR=9600’cr’
(See Description of
Arguments)
Rate
alphanumeric
Set remote baud rate in the form xxxx, where:
9600 = 9600 baud
19K2 = 19200 baud
Example: SBR=9600’cr’
Note: When changing baud rates remotely the response to the command will be returned using the same
baud rate as that used to send the command.
SBR?
(See Description of
Arguments)
Comentarios a estos manuales