Caple C871i Manual de usuario descargar pdf (Pagina 474)

100

101

Apple II Computer Info

Need BinSCII? Need Shrinkit? [] [email protected] [email protected] []

Need an Apple II Comm Soft? [] ^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^ []

E-mail / Finger me for info! [] ***New Address** If nothing else works []

Path:

news1.icaen!news.uiowa.edu!NewsNG.Chicago.Qual.Net!nyd.news.ans.net!newsfeeds.ans.

net!news.idt.net!news.maxwell.syr.edu!news.mel.connect.com.au!news.syd.connect.com

.au!news.bri.connect.com.au!not-for-mail

From: Warren Spink <[email protected]>

Newsgroups: comp.sys.apple2

Subject: Re: Apple IIgs and Super Serial card

Date: Sat, 05 Dec 1998 01:31:18 +1000

Organization: ICQ#22790704

Lines: 179

Message-ID: <[email protected]>

References: <[email protected]>

NNTP-Posting-Host: dg-1-p28.winshop.com.au

Mime-Version: 1.0

Content-Type: text/plain; charset=us-ascii

Content-Transfer-Encoding: 7bit

X-Mailer: Mozilla 4.5 [en] (Win95; I)

X-Accept-Language: en

Xref: news1.icaen comp.sys.apple2:142588

A little trick, hold down the option key when you turn the gs on and you get a

menu come up. press 1 and enter the set-up. move to slots and change the modem

slot to your card. then all you have to do is plug your card into slot 2.

before you do that, you have change the switch to terminal haven't you? if not

right next to where the cable attaches to the card there should be a black square

thingy with a white triangle on it. make sure the triangle is pointing to

terminal (next to the black square thingy on the board is modem and terminal

written) also use the following info to set up your SSC

Warren

Someone very nice sent me this:

=======================

Here's something that I found on the web that may help:

-- Begin extract ---

The plug on the card can be in either of two configurations. If you

look near the back of the card, you will see a large black block with

an arrow on it, and the words MODEM above and TERMINAL below it.

The arrow will be pointing to either of these words. You can remove

the block (it is socketed) and reverse it.

With the arrow pointing to TERMINAL, the card is configured to plug

directly into a terminal or printer with a straight-through serial

cable. With the arrow pointing to MODEM, the card is configured to

plug directly into a modem with a straight-through serial cable.

In the MODEM position, the connector is wired as a DTE. It uses the

following pins:

1 Frame Ground

2 Transmit Data

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 474 of 572

1 2 ... 469 470 471 472 473 474 475 476 477 478 479 ... 571 572

Caple C871i Manual de usuario Pagina 474

Comentarios a estos manuales

Caple C871i Manual de usuario Pagina 474

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Caple C871i