Caple C871i Manual de usuario descargar pdf (Pagina 536)

Apple II Computer Info

Another important note

=======================

The TransWarp GS firmware version 1.5 that came with the TransWarp

8K version does not work with 32K cache boards. You absolutely need

v1.7 or v1.8 for 32K cache operation. Since the firmware is

copyrighted material, we cannot supply copies of the firmware. ....

Of course, when it comes to such matters, one never knows for sure what

is available until the seller is contacted.

SHH does list several options ranging from a bare board through one

with everything installed except the v1.7 or v1.8 ROM. The info below is

from their web site:

==================================================================

Option A: Bare boards ("do-it-yourself")

==================================================================

What you get:

--------------

Two-layer piggyback boards for the TransWarp GS with solder resist,

ready for soldering all components. A sheet of paper with short but

reliable instructions how to assemble the board. NOTHING ELSE.

Heavy soldering required!

US $15 per board plus $14 shipping/handling

(six boards minimum, 22 boards maximum for this s/h fee).

==================================================================

Option B: Populated boards, without semiconductors

("dirty-work-done")

==================================================================

Since it is much cheaper to buy expensive semiconductors (such as

cache RAMs) in your own country, you might prefer this version.

What you get:

--------------

A two-layer piggyback board for the TransWarp GS with solder

resist. All non-semiconductor components (sockets, resistors,

capacitors, header connectors) mounted and ready for use. A sheet

of paper with short instructions how to add the components not

included with the board. All board functions verified. No soldering

required.

US $32 plus $14 shipping/handling

(four boards maximum for this s/h fee).

==================================================================

Option C: Fully populated boards, without Firmware EPROM

("almost plug-and-play")

==================================================================

What you get:

--------------

A two-layer piggyback board for the TransWarp GS with solder

resist. All components but the firmware EPROM soldered and ready

for use. The board includes all sockets and three 32K cache RAMs

62256-15 or equivalent (fast enough for processor clock values of

14 MHz and more). A sheet of paper with short instructions how to

add the components not included with the board. All board functions

verified.

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 536 of 572

1 2 ... 531 532 533 534 535 536 537 538 539 540 541 ... 571 572

Comentarios a estos manuales

Sin comentarios

Caple C871i Manual de usuario Pagina 536

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Caple C871i