Caple C871i Manual de usuario descargar pdf (Pagina 52)

100

101

Apple II Computer Info

the computer. The cable may be routed through the rectangular hole on the

back panel behind the original power supply. (I used a thin-nose pliers

break off a section of thin plastic so that the plug can be passed easier

through the back panel.)

(g) Carefully line up the Molex-7 plug with the motherboard

[The two black wires are positioned towards the keyboard-front of the

computer; the plug's slanted "polarizing-ramp" must face towards the

slots.]

(h) SLOWLY push the plug straight down onto its mating motherboard

power connector. The polarizing-ramp on the plug will make a click sound

when the ramp-grabbers secure it.

(i) Remount the lid onto the CPU, then System Saver (if used), and

the

monitor.

(j) Connect the power plug of the IBM power supply to your System

Saver IIgs (or to 115v power strip).

(k) Enjoy 150/200 watts of clean power in your Apple IIgs; say

goodbye

to crashes and freeze-ups attributable to low power!

INSTALLATION INSTRUCTIONS: IIE/II+ VERSION

HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

(a) All power in the computer must be OFF. Turn the CPU upside

down. Remove the four screws that attach the power supply to the bottom

of the CPU.

(b) Turn the CPU to its normal upright position. Lift the power

supply out of the CPU.

to grasp the motherboard connector. Grasp the connector plug by its sides

and squeeze. Lift the plug off the motherboard connector.

(d) Place the 150 watt power supply on the floor, below the

computer table. String its 5 ft cable through the back panel of the

computer.

(e) Position the power plug over the motherboard connector. Note

that the two BLACK wires on the connector must be oriented towards the

keyboard, and the GREEN and

BLUE wires must be oriented towards the back panel of the CPU. Push the

plug onto the motherboard connector. (Mating notches on the plug and

motherboard connector prevent the plug from being placed on the connector

in anything other than the correct way; its safe and foolproof.)

(f) Return any interface cards removed to their appropriate slots.

Put the CPU cover back on, and turn on the power!

WIRE INSULATION WIRE COLOR-CODES: APPLE II AND IBM

HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH

Color codes generally are consistent within brands, but variations

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 52 of 572

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 571 572

Caple C871i Manual de usuario Pagina 52

Comentarios a estos manuales

Caple C871i Manual de usuario Pagina 52

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Caple C871i